Description

Heavy-duty, adjustable steel supports used to hold a vehicle securely in the air after it has been lifted by a hydraulic floor jack. They are a critical safety backup system.

How They Work
Once a vehicle is lifted with a jack, the stands are placed under strong, designated support points on the vehicle’s frame, axle, or lift pads. The jack is then lowered, transferring the full weight of the vehicle onto the solid, stable stands.

Key Features

Adjustable Height: A ratchet pin or screw mechanism allows precise height setting.

Wide, Stable Base: Prevents tipping.

Load-Rated Saddle: The top U-shaped or flat surface that contacts the vehicle.

Weight Capacity: Clearly marked per pair (e.g., 3 Tonnes per stand = 6 Tonne total capacity). Never exceed.

Absolute Safety Purpose
To prevent catastrophic injury or death from a vehicle falling due to a hydraulic jack failure (which can leak or be knocked over). Jacks are for lifting only; stands are for supporting.

Critical Safety Rules (Non-Negotiable)

NEVER WORK UNDER A VEHICLE SUPPORTED ONLY BY A JACK. Always use jack stands.

Use on Solid, Level Ground: Concrete or equivalent. Never on dirt, asphalt, or slopes.

Place Under Manufacturer-Approved Lift Points: Consult the owner’s manual. Use pinch weld adapters if needed. Never on body panels, suspension arms, or the oil pan.

Test Stability: After lowering the vehicle onto the stands, gently rock the car to ensure it is stable before going underneath.

Use in Pairs & Match Height: Always use two or four stands, set to the same height, to keep the vehicle level.

Inspect Before Use: Look for cracks, severe rust, or bent components. Do not use damaged stands.

Bottom Line
Jack safety stands are the most important safety device in any home or professional garage for vehicle maintenance. They are a simple, vital, and non-negotiable insurance policy against a fatal accident. Never skip using them.